NEWS
CONTACT US
Yandiya Limited
Sales Office:
Building 4A NuaNan Ind,
Baishixia East, Fuyong,
BaoAn Shenzhen China..
Tel: +86 (0) 755- 6150 6005 - 8 Lines

Yandiya Limited
United Kingdom

uk@yandiya.com

Yandiya Limited FR
France

france@yandiya.com

Yandiya Limited EU
Europe

eu@yandiya.com

Yandiya Limited ZA
South Africa

africa@yandiya.com

Yandiya Limited
USA

usa@yandiya.com
Factory:
Building 4A NuaNan Ind,
Baishixia East, Fuyong,
BaoAn Shenzhen China..
Tel: +86 (0) 755- 6150 6005 - 8 Lines
--------------------------------------------------------
Email: sales@yandiya.com

INDUSTRY NEWS

Your position: HOME >> NEWS >> INDUSTRY NEWS
Precautions during LED storage and usage
Publish:Yandiya Limited  Time:2013-09-10

LED is very sensitive electronic components, so must be very careful during storage and usage, otherwise it will cause the damp LED, puncture or death. And a lot of problem LEDs only can be found during usage.

Storage:
1. Moisture proof and anti-electrostatic package with moisture absorbent material must be used; to keep moisture usually can keep for 1 year if not open the package.

2. Before opening the package, the LED should be kept at 30 or less and humidity less than 60%RH.

3. After opening the package, the products should be soldered with 24 hours. If not, please store at 30 degree or less and humidity less than 10%RH. It is recommended that the LED be operated at the workshop condition of ≤30 and humidity less than 60%RH.

4. If the moisture absorbent material has fade away or the LEDs HAVE exceeded the storage time, baking treatment should be performed based on the 80±5 for 24 hours.

Static electricity during usage:
Static electricity or surge voltage may damage the LEDs, damaged LED will show some unusual characteristics such as the forward voltage becomes lower, or the
LED not light at the low current, or can’t be light up.

All devices equipment and machinery must be properly grounded, at the same time, it is recommended that wristbands or anti-electrostatic gloves, anti-electrostatic containers should be used during processing LEDs.

Previous:Portable Explosion Proof LED Light  2013/09/10
Next:LEDs offer a brighter future  2013/09/10
HOME     |     ABOUT US     |     PRODUCTS     |     VIDEO     |     PARTNERS     |     QUALITY     |     INFO     |     NEWS     |     CONTACT US